Архив меток » machine «

How to buy a used bike

How to Buy a Used Bike?

You’ve always dreamt about owning that bike, but you’ve always fallen short of cash. Someone may wish to sell just the bike that you badly want at a giveaway price. If you manage to find that person, you’ll soon have your dream bike.

Some people feel that used bikes should not be purchased because owners would not sell the bikes if they were still roadworthy. This is not always true. People often sell their trusty old bikes when they need money to buy a car or wish to buy another bike that has caught their fancy. The only difference between buying an old and a new vehicle is that the old vehicle has to be tested properly before it is bought. There is another difference; in the case of used vehicles, both the buyer and the seller get to decide the price. If you wish to buy a bike that has been used, you should know what factors determine the price of used vehicles.

How prices of used vehicles are fixed

The price of a new bike of the model that you wish to buy will be one of the most important factors. If you are buying a relatively new bike, you may get the manufacturer’s warranty benefits. If this benefit is not available, then the bike will come at a cheaper rate. The age of the bike and the number of kilometers it has covered also determines the price. As a buyer, you should remember to ask for the garage history of the bike. Try to avoid bikes that have been repaired too many times.

How to find a seller

Often it is difficult to find a seller who has just the bike that you want. Some second hand bikes dealers may be able offer some options, but they’ll keep their cut. Now you needn’t give these dealers your hard earned money because there are websites which allow bike owners to advertise the bike that they wish to sell. If you keep a tab on the advertisements that are published in these sites, you’re more likely to find a bike owner and strike a deal with him. Since some of these portals do even charge money for advertising, sellers are only too happy to use the free e-space to get in touch with the buyers.

After you zero in on the motorcycle that you will purchase, you should take for a test drive. Once you’re happy with the performance, hand over the cash and the machine is yours’!

How to purchase and sell used medical equipment at online auction sites

How To Purchase And Sell Used Medical Equipment At Online Auction Sites

Medical equipment is constantly developing when it comes to technology. Technology is always changing day by day, causing many state of the art medical facilities that have the money to update their equipment regularly. The used medical equipment and used laboratory equipment, however, is far from being obsolete. In many cases, it can come in very useful to those medical facilities that may not have as much money to purchase brand new equipment and seek out the secondary market as a way to provide their patients with the best of care in a way that they can afford. Medflip Inc. is a new site that is offering both buyers and sellers a convenient way to buy and sell used medical equipment and used laboratory equipment right online through their site in a way that is convenient for both parties. Using a medical equipment auction site is one of the best ways that a medical professional can buy better quality used medical equipment as well as used laboratory equipment at a price they can afford. Medical equipment is one of the biggest expenses in any medical facility and most medical professionals are replacing older equipment with newer equipment all of the time. Those who are just starting out in practice can offer their patients services that they might have to otherwise outsource when they purchase medical equipment online. They can take advantage of the fact that many hospitals and clinics are selling their medical equipment and replacing it with brand new equipment by purchasing the used equipment from them at a price that they can afford. You do not have to have medical equipment that is the very latest technology in your medical office in order to better serve your patients. There are many clinics and facilities that service the poor that do not have access to medical equipment that they need to give the best care to their patients. By purchasing used medical equipment as well as used laboratory equipment from an online auction site, even if it is older equipment, a smaller clinic or private practice can enable their patients to get better care while saving money at the same time. The equipment that is offered at Medflip comes from all over the world and can be used all over the world to offer care to patients who might not otherwise have access to such equipment. Buyers can look at the used medical equipment that is featured on Medflip Inc. to get the best price for the item from the sellers. Sellers can sell unwanted equipment to buyers that can really use this equipment on this internet auction site. When medical professionals visit Medflip, they will not have a difficult time finding the used medical equipment that they are looking for as everything is easily categorized to make searching simple. In addition to medical equipment, you can also find dental equipment on this site as well. There is also a section for used laboratory equipment that can be used by medical professionals and even schools. This equipment can help medical professionals perform the tests that they need on patients right in the office. You can find everything from x-ray machines to exam tables and chairs when you access this online site. This site is especially beneficial to private physicians who are looking to save money with their practice while offering the best care for their patients at the same time. Sellers can take advantage of Medflip Inc to get rid of used laboratory equipment or used medical equipment that they no longer need instead of letting it sit in storage. This can, in turn, not only help them recoup some of their costs when buying new equipment, but also help another facility gain access to medical equipment that they might not otherwise be able to afford.

Increase productivity and profit with 5 axis machining

Increase Productivity and Profit with 5 Axis Machining

Copyright (c) 2010 Nadine Davis

Engineering is a dynamic industry which needs the capacity to respond quickly to advances in technology, changes in client requirements and the demands of the market. Precision Engineering Townsville has a response capacity that enables the organisation to provide high quality products to its client base.

While the technology and equipment for performing multi-axis machining has existed for many years, the applications are different for different industries. 5 axis machining is one method that reduces production time, by machining complex shapes in a single set-up. This ability provides a number of benefits to a production workshop as summarised below:

> An increase in productivity due to only having to perform a single setup (usually with just a single set of fixtures), in contrast to the other methods which need several setups at distinct and separate to achieve the same results. This saves, not only on the cost of the machining itself, but also the time and cost of preparing additional fixtures, as well as reducing the possibility of incorrect alignment by having to move the part more than once.

> Higher cutting speeds because shorter cutting tools can be used, as the head can be lowered towards the job. This alleviates some of the load on the cutter, which reduces breakages, thus increasing tool life. Also reduced is the reverberation that tends to occur more often on 3 axis machines, removing the requirement for time wasting and expensive manual mill work in order to clean up kellered surfaces.

> The ability to machine solid metal as opposed to castings – when producing complex parts this is an inexpensive and quick option, especially for small runs. It allows for much shorter led times e.g. one or two weeks as opposed to a couple of months that would be required to wait for a casting.

> Saves large amounts of time when drilling holes. This may not seem like a major benefit but time is money, and drilling a series of holes with different compound angles is very time consuming. The 5 axis machine gives allowance for the head to be aligned to drill each hole with automatically, where as with a 3 axis machine the holes need to be drilled separately.

The combination of reduced set-up times, savings on fixtures, reduced error rates and higher cutting speeds enables the job to be delivered to the client in a much shorter time frame, with little possibility of late delivery because of errors requiring re-machining. The individual businesses of each client will benefit because the components created using 5 axis machining are available on time and with high quality for the next step in their individual processes.